Frigidaire Washer Error Codes

Expert Tips

Have you spotted a strange code on your Frigidaire washer? Trying to make it vanish might not solve the problem, and that sneaky error code might pop up again. So, what’s the plan? Firstly, figure out why that code is appearing on your washer. It could be linked to any ongoing issues with your washing machine, providing clues to the problem. If that seems a bit confusing, talking to a pro who knows about appliances is a good idea. They can help unravel the mystery and get your washer back on track.

Quick Solutions for Resolving Error Codes on Frigidaire washers

Troubleshooting Frigidaire Washer Error Codes

Verify the error code: Double-check the washer’s display to ensure the error code is correctly noted. Display panels can sometimes make certain characters look similar, leading to confusion.
Reference the user manual: Look for the error code list in the user manual for your specific washer model, which often includes suggested troubleshooting steps.
Attempt a reset: Unplugging the washer for a few minutes and then plugging it back in can reset the system, potentially clearing the error.
Seek professional help: If the error code remains unclear or the problem persists after attempting a reset, it’s advisable to contact a professional appliance repair service for further assistance. Contact us to service your washer.

Repairing a washer often involves dealing with electrical components, a task that can be complex and hazardous, especially for those not familiar with appliance repair and electrical safety. If you are unsure about what you are doing or lack the necessary experience, it is strongly recommended to seek professional assistance. A qualified technician can provide an accurate diagnosis and ensure safe repairs, reducing the risk of injury or further damage to the appliance.

Got a Washer Problem?

Our Appliance Repair Team Can Fix It!

Book Your Washer Repair Today!

Error Code E11

The Frigidaire Washer error code “E11” indicates an issue where the fill time for the washer is taking too long. This error suggests that the washer is unable to fill with water at the expected rate within a specific amount of time.

Possible Causes:

Low Water Pressure: If the household water pressure is too low, it can cause the washer to fill more slowly than expected.
Clogged Inlet Screens: The screens at the water inlet hose connections might be clogged with debris, restricting water flow into the machine.
Faulty Water Inlet Valve: The water inlet valve, which controls the flow of water into the washer, may be malfunctioning or partially blocked, limiting water entry.
Kinked or Blocked Supply Hoses: The hoses that supply water to the washer might be kinked, crushed, or otherwise obstructed, reducing water flow.
Incorrect Hose Installation: If the hoses are not installed correctly, it can restrict water flow into the machine.

Fixes:

Check and Increase Water Pressure: Ensure that your home’s water pressure is adequate for the washer’s requirements. Adjustments may be necessary to meet these needs.
Clean Inlet Screens: Inspect the inlet screens for debris and clean them thoroughly to remove any blockages.
Inspect and Replace Water Inlet Valve: If the water inlet valve is faulty or clogged, it might need to be cleaned or replaced to ensure proper water flow.
Straighten Supply Hoses: Make sure that the water supply hoses are not kinked or crushed. Straighten them if necessary to allow unobstructed water flow.
Verify Hose Installation: Double-check that the hoses are connected correctly and securely to both the washer and the water supply, following the manufacturer’s instructions.

Error Code E14

The Frigidaire Washer error code “E14” indicates a problem with the reed switch, suggesting that the washer is having issues related to the water level sensing mechanism. This error can affect the washer’s ability to correctly monitor and control the amount of water in the drum.

Possible Causes:

Faulty Reed Switch: The reed switch, part of the system that senses the water level, might be malfunctioning or broken.
Wiring Issues: There could be problems with the wiring connecting the reed switch to the washer’s control board, affecting signal transmission.
Control Board Malfunction: The main control board, which interprets signals from the reed switch, could be faulty and misinterpreting those signals.
Incorrect Water Level: Abnormal water levels detected by the reed switch, whether too high or too low, can trigger this error.

Fixes:

Inspect and Replace Reed Switch: Check the reed switch for any signs of damage or malfunction. It may need to be replaced if found to be faulty.
Check Wiring Connections: Examine the wiring and connectors between the reed switch and the control board. Ensure all connections are secure and free of damage. Repair or replace wiring as necessary.
Reset the Washer: Disconnect the washer from power for a few minutes and then reconnect. A reset can sometimes resolve minor electronic glitches.
Manual Water Level Adjustment: If possible, manually adjust the water level settings according to the load size. This might temporarily bypass the issue for current wash cycles.
Contact Professional Service: Given the complexity of diagnosing and repairing issues related to the washer’s sensing mechanisms and electronic components, professional assistance is recommended. A qualified technician can accurately diagnose the problem and perform necessary repairs.

Error Code E13

The Frigidaire Washer error code “E13” indicates a water leak in the tub or air leak in the pressure sensor air hose. This error is associated with the washer detecting excess water in the tub due to leakage or a problem with the pressure system that monitors the water level.

Possible Causes:

Water Leak in the Tub: There might be a physical leak in the washer’s tub, allowing water to escape or accumulate inappropriately.
Air Leak in the Pressure Sensor Hose: The hose connected to the pressure sensor, which helps detect the water level, may have an air leak, compromising the system’s ability to accurately monitor water levels.
Clogged or Detached Pressure Sensor Hose: The hose could be clogged with debris or may have become detached, leading to incorrect readings of the water level.
Faulty Pressure Sensor: The pressure sensor itself might be defective, causing incorrect detection of water levels and triggering the error code.

Fixes:

Inspect the Washer for Leaks: Check around and under the washer for signs of water leakage. Inspect the tub for any cracks or damage that might be causing a leak.
Check the Pressure Sensor Hose: Examine the hose connected to the pressure sensor for any signs of damage, detachment, or clogging. Reattach if detached, clear any obstructions, and replace if damaged.
Test the Pressure Sensor: If possible, test the pressure sensor to ensure it is functioning correctly. A faulty sensor will need to be replaced.
Reset the Washer: Sometimes, resetting the washer can clear transient error codes. Unplug the machine for a few minutes, then plug it back in and restart the cycle.
Consult a Professional: If the error persists and you’re unable to identify or resolve the cause, it may be best to seek professional repair services. A technician can provide a more thorough inspection and carry out necessary repairs to the tub, pressure sensor, or associated components.

Error Code E21

The Frigidaire Washer error code “E21” indicates a draining issue, signifying that water is not draining out of the washer as expected. This error highlights problems within the washer’s drainage system that prevent it from efficiently removing water at the end of a wash cycle.

Possible Causes:

Clogged Drain Hose: The hose that carries water from the washer to the drain might be obstructed with debris or kinked, restricting water flow.
Blocked Drain Pump Filter: The drain pump has a filter to catch debris and prevent it from damaging the pump. If this filter becomes clogged, it can impede water flow.
Faulty Drain Pump: The pump responsible for moving water out of the drum may be malfunctioning or damaged, reducing its effectiveness.
Drain System Airlock: An airlock in the drain system can prevent water from flowing out as intended.
Improper Installation: The drain hose might be installed too high, or it could be creating a vacuum, both of which can restrict draining.

Fixes:

Inspect and Clean the Drain Hose: Check the drain hose for kinks, bends, or clogs. Straighten if kinked and clear any blockages if found.
Clean the Drain Pump Filter: Locate the drain pump filter, usually accessible from the front lower panel of the washer. Remove, clean thoroughly, and replace it.
Check the Drain Pump: Test the drain pump for functionality. Listen for unusual sounds indicating a malfunction. In some cases, the pump may need replacement.
Eliminate Drain System Airlock: Ensure that the drain hose is not forming an airlock. This may involve checking the hose’s installation and making adjustments as necessary.
Verify Hose Installation: Make sure the drain hose’s end is not too high above the washer, which can prevent proper draining due to gravity and back-siphoning issues.
Professional Assistance: If the error persists after these troubleshooting steps, or if you’re unable to resolve the draining issue, professional repair services may be necessary. A technician can provide a comprehensive assessment and repair any components causing the E21 error.

Error Code E23

The Frigidaire Washer error code “E23” indicates a drain pump relay on the control board has failed. This error points to an electrical issue affecting the washer’s ability to engage and operate the drain pump, which is critical for removing water from the washer at various points during a wash cycle.

Possible Causes:

Faulty Control Board: The main control board’s relay, responsible for sending power to the drain pump, may be damaged or malfunctioning.
Wiring Issues: There could be problems with the wiring between the control board and the drain pump, including loose connections or damaged wires.
Drain Pump Malfunction: While E23 specifically targets the control board relay, underlying issues with the drain pump itself can exacerbate or contribute to the appearance of this error.
Electrical Surges: Power surges can damage sensitive components on the control board, including the drain pump relay.

Fixes:

Inspect the Control Board: Check the control board for signs of damage, burnt areas, or any components that appear faulty. Given the complexity, this is often best left to professionals.
Check Wiring and Connections: Ensure that all connections between the control board and the drain pump are secure. Look for and repair any damaged wires.
Test the Drain Pump: Verify the functionality of the drain pump separately, if possible. This can help isolate the issue to the control board relay.
Reset the Washer: Disconnect the washer from power for a few minutes to reset the system. This can sometimes clear transient errors.
Professional Repair: Due to the technical nature of this issue and the risk of misdiagnosis, professional repair services are recommended. A qualified technician can accurately diagnose the problem, whether it’s with the control board or the drain pump, and perform necessary repairs.
Replace the Control Board: If the relay on the control board is indeed faulty, replacement of the board may be necessary. This is a significant repair that typically requires professional assistance.

Error Code E24

The Frigidaire Washer error code “E24” signifies a problem with the drain pump relay. Unlike other error codes that might indicate issues with water input or sensor malfunctions, E24 specifically points to concerns around the mechanism responsible for draining water from the machine.

Possible Causes:

Control Board Issues: The main culprit for an E24 error is often the washer’s control board, where the relay that controls the drain pump could be malfunctioning or have failed.
Faulty Drain Pump: While E24 focuses on the relay, a faulty drain pump can also trigger this error code. If the pump is unable to operate correctly, the control board may register a fault.
Wiring Problems: Loose or damaged wiring between the control board and the drain pump can lead to this error, as the connection is crucial for pump operation.
Clogged Drain System: Although primarily indicating an electrical problem, a clogged drain system might contribute to the issue by putting additional strain on the pump and the controlling relay.

Fixes:

Inspect and Test the Drain Pump: Check for any blockages or mechanical failures with the drain pump itself. Ensure it is clean and can turn freely.
Examine the Control Board: Look for signs of damage or failure on the control board, specifically around the relay areas. This might require professional assessment.
Check Electrical Connections: Make sure all connections between the drain pump and the control board are secure and intact. Repair any damaged wiring.
Reset the Washer: Sometimes, simply resetting the washer by unplugging it for a few minutes can clear the error and reset the system’s operations.
Professional Diagnosis and Repair: Given that E24 involves electrical components and the control board, it’s often best to consult with a professional for diagnosis and repair. They can accurately determine if the issue lies with the drain pump, the control board, or elsewhere.
Replace Faulty Parts: Depending on the diagnosis, replacing the drain pump or the control board may be necessary. Replacement should be done by a qualified technician to ensure accuracy and safety.

Error Code E31

The Frigidaire Washer error code “E31” indicates a problem with the pressure sensor signal. This error suggests that the washer’s control system is receiving incorrect information from the pressure sensor, which is critical for determining the water level inside the machine during a wash cycle.

Possible Causes:

Faulty Pressure Sensor: The pressure sensor, responsible for monitoring the water level, may be malfunctioning, leading to inaccurate readings.
Wiring Issues: Problems with the wiring or connections between the pressure sensor and the control board can disrupt the sensor’s signal.
Control Board Malfunction: If the control board is not processing the pressure sensor’s signals correctly, it could result in an E31 error.
Clogged Pressure Hose: The hose that connects the tub to the pressure sensor could be clogged, affecting the sensor’s ability to accurately gauge water levels.
Air Leaks in Pressure Hose: Any air leaks in the pressure hose can also lead to incorrect readings from the pressure sensor.

Fixes:

Inspect and Clean the Pressure Hose: Check the hose for clogs or debris and clean it out. Ensure there are no kinks or damage that could affect air pressure readings.
Check for Air Leaks: Examine the pressure hose for any signs of leaks. Replace the hose if any leaks are found.
Examine Wiring and Connections: Ensure all connections between the pressure sensor and the control board are secure. Look for and repair any damaged wires.
Test the Pressure Sensor: If possible, test the pressure sensor’s functionality. A faulty sensor will need to be replaced.
Reset the Washer: Unplugging the washer for a few minutes can reset the system and may clear the error code.
Professional Assistance: Due to the technical nature of diagnosing and repairing an E31 error, it’s advisable to seek professional help. A qualified technician can accurately diagnose issues with the pressure sensor, control board, or related components.

Error Code E35

The Frigidaire Washer error code “E35” indicates an issue with water overfilling. This error suggests that the washer is detecting too much water in the tub during a cycle, which can be due to various reasons related to the water inlet system or the pressure switch/sensor responsible for monitoring the water level.

Possible Causes:

Faulty Water Inlet Valve: If the water inlet valve fails to close completely, it may allow too much water to enter the washer, leading to overfilling.
Malfunctioning Pressure Switch or Sensor: The pressure switch or sensor that measures the water level might be faulty, providing incorrect readings that cause the washer to overfill.
Clogged or Incorrectly Positioned Pressure Hose: The hose connected to the pressure switch may be clogged with debris or not properly positioned, affecting water level detection.
Control Board Issues: A malfunction within the washer’s control board could result in improper water level regulation.

Fixes:

Inspect the Water Inlet Valve: Check the valve for any signs of leakage or malfunction. Perform a manual test to ensure it closes completely after the fill cycle. Replace if necessary.
Test the Pressure Switch/Sensor: Evaluate the functionality of the pressure switch or sensor. Use a multimeter to check for continuity and replace the component if it’s not operating as expected.
Clean and Adjust the Pressure Hose: Examine the hose for any blockages and clear them. Ensure the hose is correctly attached and positioned to accurately measure water pressure.
Reset the Washer: Disconnecting the washer from power for a few minutes can reset the system, potentially clearing the error and correcting minor electronic glitches.
Examine and Repair Control Board: If the control board is suspected to be the cause, it’s often best handled by a professional due to the complexity of electronic repairs. Look for any signs of damage or burn marks on the board.
Professional Diagnosis and Repair: Because E35 involves critical components like the water inlet valve and the pressure system, seeking professional service is recommended for accurate diagnosis and safe, effective repairs.

Error Code E43

The Frigidaire Washer error code “E43” indicates a problem with the door lock assembly. This error suggests that the washer’s control system has detected an issue with the locking mechanism that prevents the door from properly locking or unlocking.

Possible Causes:

Faulty Door Lock Assembly: The lock assembly may be malfunctioning, preventing the door from securing properly during operation.
Wiring Issues: Problems with the wiring or connections between the door lock assembly and the control board can disrupt communication, leading to this error.
Control Board Malfunction: The washer’s control board may fail to correctly interpret signals from the door lock assembly due to a malfunction.
Mechanical Obstruction: Objects or debris lodged in the door or lock mechanism can impede proper locking and unlocking.

Fixes:

Inspect the Door Lock Assembly: Check the door lock for any visible signs of damage or wear. Ensure there’s no obstruction preventing the lock from engaging.
Check Wiring and Connections: Examine the wiring connecting the door lock assembly to the control board. Look for loose connections or damaged wires and secure or replace as necessary.
Test the Door Lock Assembly: Use a multimeter to test the door lock assembly for continuity. If it fails the test, the lock assembly will need to be replaced.
Clear Mechanical Obstructions: Ensure there’s nothing blocking the door from closing or the lock from engaging properly. Remove any foreign objects found.
Reset the Washer: Sometimes, simply resetting the washer by unplugging it for a few minutes can resolve electronic glitches, including issues with the door lock.
Professional Repair: Given the complexity of diagnosing and repairing issues related to the door lock and control board, professional service is recommended. A qualified technician can accurately diagnose the problem and replace faulty components.

Error Code E44

The Frigidaire Washer error code “E44” indicates a problem with the control board, specifically related to the door lock circuit. This error suggests that the washer’s electronic control has detected an issue with the communication or functionality of the door lock system, which is essential for the safety and proper operation of the machine.

Possible Causes:

Control Board Failure: The main cause of an E44 error is a failure within the control board itself, affecting the circuitry that controls the door lock mechanism.
Faulty Door Lock Assembly: While the error primarily points to the control board, a faulty door lock assembly can also contribute to this issue by failing to communicate properly with the control board.
Wiring Issues: Problems with the wiring or connectors between the door lock assembly and the control board can lead to errors in communication, resulting in an E44 error.
Power Surges: Electrical power surges can damage sensitive components on the control board, affecting its ability to manage various functions, including the door lock.

Fixes:

Inspect Wiring and Connections: Check for loose or damaged wires between the door lock assembly and the control board. Ensure all connections are secure and intact.
Reset the Washer: Try resetting the washer by unplugging it for a few minutes to clear any temporary glitches in the control board.
Test the Door Lock Assembly: Use a multimeter to check the door lock for continuity. If the door lock assembly is defective, replacing it may resolve the issue.
Replace the Control Board: If the wiring and door lock assembly are in good condition, the problem likely lies within the control board itself. Replacing the control board is a more complex repair that might require professional assistance.
Seek Professional Help: Due to the complexity of diagnosing and repairing electronic components, it’s often best to consult with a professional appliance repair technician. They can accurately diagnose the issue and replace the necessary parts.

Error Code E45

The Frigidaire Washer error code “E45” indicates a problem with the control board, suggesting that the board is not communicating effectively with the other components of the washer. This error code points to a significant issue affecting the washer’s ability to operate correctly, as the control board is essential for managing and coordinating the machine’s functions.

Possible Causes:

Control Board Malfunction: The primary cause of an E45 error is a malfunction within the washer’s electronic control board, which may be due to component failure, electrical shorts, or damage.
Power Surges: Electrical surges can damage the control board, leading to communication errors and malfunction.
Loose or Damaged Wiring: Connections between the control board and other components may be loose, corroded, or damaged, disrupting communication.
Software Glitch: Sometimes, the firmware or software on the control board can experience glitches, affecting its performance.

Fixes:

Check Electrical Connections: Inspect the wiring and connections between the control board and other components for any signs of damage, wear, or looseness. Secure any loose connections and replace damaged wires.
Reset the Washer: Attempt to reset the washer by unplugging it for a few minutes and then plugging it back in. A reset can sometimes clear temporary software glitches.
Inspect the Control Board: Look for any visible signs of damage or burning on the control board, which could indicate component failure.
Update Firmware: If your washer model supports firmware updates, check for and install any available updates that might address known issues.
Professional Diagnosis and Repair: Given the complexity of electronic control board issues, professional diagnosis and repair are often necessary. A qualified technician can accurately determine if the control board needs to be repaired or replaced.
Replace the Control Board: If the control board is determined to be faulty, replacing it is usually the most effective solution. This repair should be performed by a professional to ensure correct installation and functionality.

Error Code E46

The Frigidaire Washer error code “E46” generally signifies a problem related to the control board, indicating that the board is not able to communicate properly or has detected an internal failure. This issue can significantly affect the washer’s operation, as the control board is central to all washing functions and cycles.

Possible Causes:

Control Board Failure: The most direct cause of an E46 error is a failure within the washer’s electronic control board. This could be due to component wear, damage, or electrical issues within the board itself.
Electrical Surges: Power surges can damage sensitive electronics within the control board, leading to various errors including E46.
Corroded or Loose Wiring: Over time, connections to the control board can become loose or corroded, impacting the board’s ability to communicate with other parts of the washer.
Software or Firmware Glitches: Occasionally, the software or firmware on the control board may experience glitches, which can trigger error codes erroneously.

Fixes:

Inspect Wiring Connections: Check all electrical connections to the control board for signs of looseness, corrosion, or damage. Tighten any loose connections and clean or replace any corroded or damaged wires.
Reset the Washer: A basic reset—unplugging the washer for a few minutes and then plugging it back in—can sometimes resolve temporary glitches or errors.
Examine the Control Board: Look for visible signs of damage, burn marks, or component failure on the control board. Any such signs may indicate that the board needs replacement.
Update or Re-flash Firmware: If your model supports it, updating or re-flashing the firmware might correct software-related issues. This typically requires professional assistance.
Seek Professional Repair: Diagnosing and repairing a control board issue is complex and often requires specialized knowledge and tools. If the above steps don’t resolve the E46 error, it’s advisable to contact a professional appliance repair technician.
Control Board Replacement: If the control board is determined to be faulty, it will likely need to be replaced. This is a critical repair that should be done by a professional to ensure proper functioning and to avoid further issues.

Error Code E47

The Frigidaire Washer error code “E47” indicates an issue with the door lock assembly, specifically pointing to the washer’s inability to interpret the door as being locked. This problem suggests that the control board is not receiving the proper signal indicating that the door lock mechanism has successfully engaged, which is a safety feature required to start or continue a wash cycle.

Possible Causes:

Faulty Door Lock Assembly: The door lock assembly might be malfunctioning or damaged, failing to send the correct signal to the control board.
Wiring Issues: There could be a problem with the wiring or connectors between the door lock assembly and the control board, disrupting the signal.
Control Board Malfunction: The control board itself may have an issue processing the signal from the door lock, even if the lock is functioning correctly.
Door Latch Misalignment: If the door is not closing or latching properly due to alignment issues, the lock mechanism may not engage as it should.

Fixes:

Inspect the Door Lock Assembly: Check the door lock for any visible signs of damage or wear. Ensure it is properly engaging when the door is closed.
Test the Door Lock Mechanism: Use a multimeter to test the door lock assembly for continuity. A lack of continuity indicates a need for replacement.
Check Wiring and Connections: Examine the wiring between the door lock assembly and the control board. Ensure all connections are secure and there are no damaged wires.
Adjust or Repair the Door Latch: If the door is not aligning properly with the latch, make necessary adjustments to ensure a proper seal and lock engagement.
Reset the Washer: Disconnect the washer from power for a few minutes to reset the control board, which may clear the error and re-establish proper communication.
Professional Repair: Given the potential complexities involved in diagnosing and repairing a door lock issue, especially if it relates to the control board, seeking professional assistance is advisable. A qualified technician can accurately pinpoint the problem and carry out necessary repairs.

Error Code E48

The Frigidaire Washer error code “E48” signifies a problem with the control board, specifically indicating that the board is not correctly interpreting signals from the door lock system. This error suggests a communication or functional failure within the washer’s control mechanisms, preventing the machine from verifying that the door is securely locked before or during operation.

Possible Causes:

Control Board Failure: The primary cause of an E48 error is a malfunction within the washer’s control board, which could be due to electrical issues, component failure, or software glitches.
Faulty Door Lock Assembly: While the error focuses on the control board, a defective door lock assembly can also contribute to this issue if it fails to send the correct signals.
Wiring or Connector Problems: Damaged or loose wiring and connectors between the door lock assembly and the control board can lead to communication errors, resulting in this fault code.

Fixes:

Inspect and Test the Door Lock Assembly: Although the E48 error points to the control board, checking the door lock for proper operation is a good first step. If the door lock is defective, replacing it might resolve the issue.
Check Wiring and Connections: Examine all related wiring and connectors for signs of damage, wear, or loose connections that could impair communication between the door lock assembly and the control board.
Control Board Inspection: Look for any signs of damage or burning on the control board, which could indicate a failure. Pay special attention to the components related to the door lock circuit.
Reset the Washer: Attempt to reset the washer by unplugging it from the power source for a few minutes. This can sometimes clear glitches and restore normal operation.
Professional Evaluation: Due to the complexity of diagnosing and repairing control board-related issues, professional service is highly recommended. A qualified technician can conduct thorough diagnostics to confirm the cause of the E48 error and recommend the best course of action, whether it involves repairing the control board or replacing it entirely.

Experience Excellence in Appliance Repairs

Error Code E52

The Frigidaire Washer error code “E52” indicates a problem with the motor circuit. This error suggests that the washer’s main control board has detected an issue related to the motor’s function, which could be affecting the washer’s ability to spin or agitate properly.

Possible Causes:

Faulty Motor: The washer’s motor may be malfunctioning, preventing it from operating correctly.
Motor Control Board Issues: Problems with the motor control board can disrupt the communication or power supply to the motor.
Wiring Problems: Loose or damaged wiring between the motor, motor control board, and main control board could lead to this error code.
Overloading: Occasionally, overloading the washer can strain the motor, triggering error codes related to motor function.

Fixes:

Check for Overloading: Reduce the load in the washer and try running a cycle to see if the error persists. Overloading can temporarily strain the motor.
Inspect the Motor: Visually inspect the motor for signs of damage or overheating. Use a multimeter to test the motor’s continuity and winding resistance.
Examine Wiring and Connections: Check all wiring connecting the motor to the motor control board and the main control board. Secure any loose connections and replace any damaged wires.
Test the Motor Control Board: Inspect the motor control board for signs of damage or burnt components. Testing the board’s functionality may require professional tools and knowledge.
Reset the Washer: Unplug the washer for a few minutes to reset the electrical system, which may clear temporary glitches.
Professional Diagnosis and Repair: If the issue is not resolved with basic troubleshooting, it’s advisable to seek professional help. A qualified technician can provide a comprehensive diagnosis and repair or replace faulty components

Error Code E55

The Frigidaire Washer error code “E55” typically indicates a problem with the motor overheating. This error suggests that the motor has exceeded the safe temperature threshold during operation, potentially due to overuse, mechanical malfunction, or insufficient cooling.

Possible Causes:

Overloading: Placing too many items in the washer can strain the motor, causing it to overheat.
Faulty Motor: The motor itself might be malfunctioning, either due to wear or internal damage, leading to excessive heat generation.
Insufficient Ventilation: Poor ventilation around the washer can contribute to motor overheating, as the heat generated during operation cannot dissipate effectively.
Drive System Issues: Problems with the drive system, such as a worn belt or bearings, can cause the motor to work harder than it should, increasing heat output.

Fixes:

Reduce Load Size: Try washing smaller loads to see if the problem persists. Overloading is a common cause of motor overheating.
Allow Motor to Cool: Turn off the washer and wait for the motor to cool down before attempting another cycle. This can help prevent further overheating and potential damage.
Check Ventilation: Ensure there is adequate space around the washer for air to circulate freely. Remove any objects that might be blocking airflow to and from the motor.
Inspect Drive System Components: Check for wear or damage to the drive belt, pulleys, and bearings. Replace any faulty components to reduce strain on the motor.
Examine the Motor: Look for signs of wear, damage, or overheating on the motor itself. Test the motor’s windings for continuity with a multimeter. A faulty motor may need to be replaced.
Professional Repair: Due to the complexity of diagnosing and repairing motor and drive system issues, professional service is recommended. A qualified appliance repair technician can accurately identify the cause of the overheating and perform necessary repairs.

Error Code E56

The Frigidaire Washer error code “E56” indicates a high motor current. This error suggests that the motor is drawing more electrical current than expected during operation, which could be a sign of mechanical resistance or an electrical problem.

Experience Excellence in Appliance Repairs

Possible Causes:

Motor Overload: If the washer is overloaded with clothes, it can cause the motor to work harder, increasing the current draw.
Faulty Motor: A malfunctioning motor can draw excessive current due to internal damage or wear.
Drive System Obstruction: Obstructions or malfunctions in the drive system, such as a seized bearing or a jammed pulley, can increase the resistance the motor must overcome, leading to higher current draw.
Electrical Issues: Problems with the washer’s electrical system, including faulty wiring or issues with the control board, can cause incorrect current supply to the motor.

Fixes:

Check Load Size: Ensure you are not overloading the washer. Try running a cycle with a smaller load to see if the error persists.
Inspect the Motor: Examine the motor for signs of wear or damage. Use a multimeter to check for continuity and proper resistance levels in the motor windings.
Examine Drive System: Look for any obstructions or damage to components like the drive belt, bearings, and pulleys. Replace any damaged parts to ensure smooth operation.
Check Electrical Connections: Inspect all electrical connections to the motor and control board for signs of wear, damage, or loose connections. Secure any loose connections and replace damaged wires.
Reset the Washer: Sometimes, resetting the washer can clear temporary electrical glitches. Unplug the washer for a minute, then plug it back in and try running a cycle.
Professional Diagnosis: Due to the potential complexity of electrical and mechanical issues leading to an E56 error, it might be necessary to contact a professional appliance repair technician. They can perform a thorough diagnosis and recommend appropriate repairs.

Error Code E57

The Frigidaire Washer error code “E57” signifies a high current issue with the inverter for the motor, indicating that the inverter is drawing more electrical current than normal. This specific error is related to the component that converts electrical power to drive the motor, crucial for the washer’s spinning and agitating actions.

Possible Causes:

Inverter Fault: The primary cause of an E57 error is a malfunction within the inverter itself, potentially due to component failure, overheating, or electrical issues within the inverter circuitry.
Motor Overload: An overloaded washer or a mechanical problem causing resistance to the motor’s movement can lead to excessive current draw through the inverter.
Faulty Motor: If the motor has internal damage or wear, it might require more power to operate, stressing the inverter.
Electrical Supply Issues: Fluctuations or inconsistencies in the home’s electrical supply could affect the inverter’s operation.

Fixes:

Reduce Washer Load: Try running the washer with a smaller load to ensure it’s not overloaded, which could be stressing the motor and inverter.
Inspect the Inverter: Check the inverter for signs of damage, overheating, or wear. This may require a professional as inverters can have complex electrical components.
Check Motor and Drive System: Examine the motor and associated drive system components (belts, pulleys) for damage or obstructions that could increase resistance.
Test Electrical Supply: Ensure the washer is receiving a stable electrical supply. Consider consulting an electrician if you suspect home electrical issues.
Reset the Washer: Disconnecting the washer for a few minutes can reset the system, potentially resolving temporary electrical glitches.
Professional Repair: Given the complexity of diagnosing and repairing an issue with the inverter or motor, professional service is recommended. A qualified technician can accurately assess the problem and perform necessary repairs or replacements.

Error Code E58

The Frigidaire Washer error code “E58” indicates a high current on the motor phase. This error suggests that during operation, one or more phases of the motor are drawing more electrical current than is typical, which could point to several potential issues with the washer’s motor or its electrical supply to the motor.

Possible Causes:

Motor Overload: If the washer is overloaded with clothes, it can cause the motor to work harder than normal, leading to an increased current draw.
Faulty Motor: A malfunctioning motor can draw excessive current if it has internal damage or wear, affecting its efficiency.
Drive System Issues: Problems within the drive system, such as worn bearings or a jammed pulley, can increase the resistance the motor must work against, causing higher current draw.
Wiring or Connection Problems: Poor wiring or loose connections in the motor circuit can result in uneven distribution of current to the motor phases.
Control Board Malfunction: Issues with the control board can lead to improper regulation of power to the motor, potentially causing one phase to draw more current than others.

Fixes:

Reduce Load Size: Ensure that the washer is not overloaded by reducing the size of the laundry load and trying again.
Inspect the Motor: Check the motor for signs of wear, overheating, or damage. Use a multimeter to test the motor’s windings for continuity and resistance.
Check Drive System Components: Examine the washer’s drive belt, pulleys, and bearings for any signs of wear or damage. Replace any faulty components to reduce mechanical resistance.
Examine Wiring and Electrical Connections: Ensure all connections to the motor and from the control board are secure and in good condition. Look for and repair any damaged wires.
Reset the Washer: Unplugging the washer for a few minutes and then reconnecting it can sometimes reset the system and clear the error.
Seek Professional Diagnosis and Repair: Given the potential complexity and safety concerns of electrical and mechanical repairs, it’s advisable to contact a professional appliance repair service. A technician can accurately diagnose the cause of the E58 error and carry out necessary repairs.

Error Code E59

The Frigidaire Washer error code “E59” indicates “No Tacho Signal for 3 Seconds.” This specific error points to an issue where the washing machine’s control system is not receiving a signal from the tachometer on the motor, which is essential for monitoring and controlling the motor’s speed.

Possible Causes:

Faulty Motor: If the motor is damaged or malfunctioning, it may not generate the necessary tachometer signal.
Wiring Issues: Loose or damaged wiring between the motor and the control board could prevent the tachometer signal from being transmitted.
Defective Tachometer: The tachometer, which measures the motor’s speed, could be faulty or not functioning correctly.
Control Board Problems: The control board itself may have an issue processing the tachometer signal, even if the signal is being generated properly.

Fixes:

Inspect Motor and Tachometer: Check the motor for any signs of damage or wear. If accessible, inspect the tachometer (usually attached to the motor) for damage or disconnection.
Check Wiring Connections: Examine all wiring connections between the motor, tachometer, and control board. Ensure all connections are secure and that there are no damaged wires.
Test the Motor: Use a multimeter to test the motor’s windings for continuity and the tachometer for proper function. This may require technical knowledge or a service manual for your specific washer model.
Reset the Washer: Disconnect the washer from the power source for a few minutes, then reconnect it. A reset can sometimes clear the error and restore normal operation.
Professional Diagnosis and Repair: Given the complexity of this issue, involving both electrical components and the washer’s control system, professional service is recommended. A qualified appliance repair technician can accurately diagnose the problem and replace faulty components as needed.

Error Code E5A

The Frigidaire Washer error code “E5A” indicates a “High Temperature on Heat Sink.” This error occurs when the heat sink on the motor control board has exceeded a safe temperature threshold, potentially indicating an overheating issue within the washer’s motor or control system.

Possible Causes:

Overloading: Washing too many clothes at once can cause the motor to work harder than it should, leading to overheating.
Faulty Motor Control Board: A malfunctioning motor control board can improperly regulate power, causing excessive heat.
Poor Ventilation: Inadequate ventilation around the washer, especially if installed in a tight space, can contribute to overheating.
Blocked Filters or Drains: Blocked filters or drains may cause the motor to overwork, leading to increased temperatures.

Fixes:

Reduce Load Size: Ensure you’re not overloading the washer. Follow the manufacturer’s guidelines for load sizes.
Ensure Proper Ventilation: Check that the washer has enough space around it for proper air circulation. Avoid installing it in tightly enclosed spaces without adequate airflow.
Check and Clean Filters/Drains: Inspect the washer’s filters and drain system for blockages or obstructions, and clean them as necessary to ensure smooth operation.
Inspect the Motor Control Board: Look for signs of damage or burning on the motor control board, which could indicate overheating. This may require technical expertise to assess properly.
Cool Down and Reset: Turn off the washer and allow it to cool down for a period. Then, try resetting it by unplugging it for a few minutes before plugging it back in.
Professional Diagnosis and Repair: Due to the technical nature of this error and the potential for electrical component involvement, it’s advisable to seek professional assistance. A qualified technician can thoroughly diagnose the issue and replace any faulty components, such as the motor control board, to resolve the overheating problem.

Error Code E5B

The Frigidaire Washer error code “E5B” indicates a “No Heat” error. This error signifies that the washing machine’s heating element did not increase in temperature during a cycle that requires heating, such as a sanitize or hot wash cycle.

Possible Causes:

Faulty Heating Element: The heating element may be damaged or malfunctioning, preventing it from heating the water.
Wiring Issues: There could be a problem with the wiring or connections to the heating element, causing a lack of power.
Control Board Problems: The washer’s control board might not be sending the correct signals to the heating element due to a fault or software glitch.
Thermal Fuse or Thermostat Failure: A blown thermal fuse or a faulty thermostat can prevent heating by disrupting the power flow to the heating element.

Fixes:

Check the Heating Element: Perform a visual inspection and continuity test on the heating element to determine if it’s functioning correctly. Replace it if it’s faulty.
Inspect Wiring and Connections: Examine the wiring and connectors leading to the heating element for any signs of damage or loose connections. Repair or secure connections as necessary.
Examine the Control Board: Look for signs of damage or burns on the control board, which might indicate a problem with the circuits that control the heating element. Consider consulting a professional for a detailed diagnosis.
Test Thermal Fuse and Thermostat: Use a multimeter to test the continuity of the thermal fuse and thermostat. These components should have continuity; if not, they need to be replaced.
Reset the Washer: Sometimes, a simple reset can clear temporary software glitches. Unplug the washer for a few minutes before plugging it back in to see if the issue resolves.
Seek Professional Help: If the problem persists after attempting the above fixes, or if you’re uncomfortable performing these checks yourself, it’s best to call a professional technician. A skilled technician can accurately diagnose and resolve issues with the heating system.

Error Code E5C

The Frigidaire Washer error code “E5C” indicates a problem with the motor control system. This error suggests that the washer is experiencing issues related to the motor’s speed control or its electrical circuit, which could impact the machine’s ability to spin or agitate properly.

Possible Causes:

Faulty Motor Control Board: The motor control board regulates the motor’s speed and direction. If it’s malfunctioning, it can lead to errors in motor operation.
Motor Overheating: An overheated motor may trigger protective measures, resulting in an E5C error code.
Electrical Wiring Issues: Problems with the wiring between the motor control board and the motor itself, including loose connections or damaged wires, can disrupt motor control.
Drive System Obstructions: Mechanical issues within the washer’s drive system, such as seized bearings or a jammed pulley, could strain the motor and affect control board function.

Fixes:

Inspect the Motor Control Board: Look for signs of damage, such as burnt components or loose connections, on the motor control board. Consider professional assessment for detailed diagnostics.
Check the Motor: Ensure the motor is not overheated. Allow it to cool if necessary and check for signs of wear or damage.
Examine Electrical Wiring: Verify all connections between the motor and its control board are secure. Repair or replace any damaged wiring to ensure proper communication.
Clear Drive System Obstructions: Inspect the washer’s drive system for any obstructions or mechanical issues that could be overloading the motor. Make necessary repairs to ensure smooth operation.
Reset the Washer: Unplugging the washer for a few minutes can reset the system, possibly clearing the error and restoring normal function.
Professional Repair: Due to the complexity of motor control issues, professional repair is often necessary. A qualified technician can accurately diagnose the problem and replace faulty components, such as the motor control board or the motor itself.

Error Code E5D

The Frigidaire Washer error code “E5D” indicates a communication problem between the control boards. Specifically, this error suggests that there is an issue with the data exchange between the main control board and the motor control board, affecting the washer’s ability to function properly.

Possible Causes:

Faulty Control Board: Either the main control board or the motor control board could be malfunctioning, leading to poor communication.
Wiring Issues: Problems with the wiring harness that connects the control boards, including loose connections, damaged wires, or corrosion, can disrupt communication.
Electrical Interference: External electrical interference could potentially affect the communication between the boards.
Software Glitch: Occasionally, software issues within the control boards can cause communication errors.

Fixes:

Inspect and Secure Connections: Check the wiring harness between the main control board and the motor control board. Ensure all connections are tight and secure, and repair or replace any damaged wires.
Check for Signs of Damage: Look for visible signs of damage, corrosion, or burnt components on both control boards. Such damage may necessitate board replacement.
Reset the Washer: Unplug the washer for a few minutes to reset the system. This can sometimes resolve minor software glitches and restore communication.
Shield from Electrical Interference: Ensure that the washer is not placed near devices that could generate significant electrical interference.
Professional Diagnosis: Due to the complexity of diagnosing communication issues between control boards, professional assistance is often required. A technician can use specialized tools to test the control boards and the wiring harness for faults.
Replace Faulty Components: Based on the diagnosis, replacement of the wiring harness, one of the control boards, or both may be necessary. This should be done by a professional to ensure proper installation and functionality.

Error Code E5E

The Frigidaire Washer error code “E5E” indicates a communication problem between the electronic control board and the motor control board. This error suggests there’s a failure in the exchange of information between these critical components, which can significantly impact the washer’s operation, preventing it from performing correctly.

Possible Causes:

Faulty Wiring or Connections: Loose or damaged wires between the control board and the motor control board can interrupt the flow of information, leading to communication errors.
Control Board Issues: Malfunctions in either the main electronic control board or the motor control board can disrupt communication. Such issues might stem from component failures, electrical surges, or moisture damage.
Software Glitches: Sometimes, the software within the control boards can experience glitches that affect their ability to communicate properly.

Fixes:

Inspect Wiring and Connections: Check all wiring harnesses and connectors between the main control board and the motor control board for any signs of looseness, damage, or corrosion. Secure any loose connections and replace damaged wires.
Reset the Washer: Unplugging the washer for a few minutes can reset the electronic systems, potentially clearing temporary glitches and restoring communication between boards.
Examine the Control Boards: Look for visible signs of damage or malfunction on both the main control board and the motor control board, such as burnt components or corrosion. Such damage may necessitate board replacement.
Update Firmware: If your washer model supports it, updating the firmware of the electronic control board could resolve software-related communication issues.
Professional Diagnostic and Repair: Given the complexity of diagnosing and repairing electronic communication issues, professional service is often required. A technician with experience in appliance electronics can provide a thorough diagnosis and recommend the appropriate repairs, whether it involves replacing wiring, or control boards, or addressing software issues.

Error Code E5F

The Frigidaire Washer error code “E5F” indicates a problem with the communication from the control panel to the motor control board. This error signifies that the washer’s main control unit is having trouble sending or receiving signals to the motor control board, which can interfere with the machine’s ability to operate properly.

Possible Causes:

Faulty Wiring or Connections: Damaged or loose wiring harnesses between the control panel and the motor control board can disrupt communication.
Control Board Malfunction: Issues with the motor control board or the main electronic control board can prevent effective communication. These issues might be due to failed components, electrical surges, or moisture.
Interference or Software Glitches: Electromagnetic interference or software problems within the control boards can also lead to communication errors.

Fixes:

Check and Secure Wiring: Inspect all the wiring and connections between the control panel and the motor control board for signs of damage, wear, or looseness. Repair or replace any faulty wiring and ensure all connections are secure.
Reset the Washer: Unplug the washer for a few minutes to reset the electronic components. This can sometimes clear the error by resetting the washer’s internal systems.
Control Boards Inspection: Look for any visible signs of damage or malfunction on both the control panel and the motor control board. Burnt components, corrosion, or other damage may require replacement of the affected board.
Firmware Update: If applicable, check if there’s a firmware update available for your washer model that might address known communication issues.
Professional Assistance: Due to the technical nature of diagnosing and repairing communication issues between the control panel and the motor control board, it’s often best to seek professional help. A qualified technician can provide a detailed diagnosis and carry out necessary repairs, including the replacement of electronic boards or updating software.

Error Code E67

The Frigidaire Washer error code “E67” indicates an issue with the input voltage to the machine. This error suggests that the voltage detected by the washer’s control system is either too high or too low for the appliance’s normal operation. It’s crucial to address this issue promptly to prevent potential damage to the washer’s electronic components or ensure safe operation.

Possible Causes:

Voltage Fluctuations: The power supply to the washer may be experiencing fluctuations outside the normal operating range, either too high (surge) or too low (drop).
Faulty Control Board: The washer’s main control board could be misinterpreting normal voltage levels due to a malfunction within its circuitry.
Electrical Supply Issues: Problems with the home’s electrical supply or the specific circuit feeding the washer could result in incorrect voltage levels.
Power Outages or Surges: Recent power outages, lightning strikes, or power surges in the home could affect the washer’s power supply and its ability to detect normal voltage.

Fixes:

Check Home Voltage Supply: Use a multimeter to verify that the voltage in the home’s outlet matches the washer’s requirements. Ensure there are no broader issues with the home’s electrical system.
Inspect Power Cord and Outlet: Ensure the washer’s power cord is undamaged and properly plugged in. Check the outlet for any signs of damage or wear and test other devices in the same outlet to confirm it’s functioning correctly.
Reset the Washer: Unplug the washer for a few minutes to reset its control system, which might correct the error if it’s due to a temporary glitch in voltage detection.
Surge Protection: Consider using a surge protector to safeguard the washer against future voltage spikes that could trigger similar errors.
Professional Evaluation: If the problem persists and you suspect it’s due to an issue with the washer’s control board or an incorrect reading, professional service is recommended. A technician can accurately diagnose electrical issues and safely repair or replace faulty components.
Consult an Electrician: If the voltage problem seems to be related to the home’s electrical supply rather than the washer itself, consulting a licensed electrician is advisable to ensure the safety and stability of your home’s power supply.

Service Locations

We come to you, view all service location areas

Error Code E75

The Frigidaire Washer error code “E75” indicates a problem related to the water temperature sensor circuit. This error suggests that the sensor, which monitors the water temperature during cycles, is not functioning correctly, potentially due to issues within the circuit that connects the sensor to the washer’s control system.

Possible Causes:

Faulty Water Temperature Sensor: The sensor itself might be malfunctioning or damaged, leading to inaccurate readings or failure to communicate temperature data.
Wiring Issues: Problems with the wiring or connections between the temperature sensor and the washer’s main control board can interrupt the sensor’s signal.
Control Board Malfunction: A malfunction in the washer’s main control board could misinterpret the signals received from the temperature sensor, even if the sensor is working correctly.
Circuit Overload or Short: An overload or short within the circuit dedicated to the temperature sensor can cause this error code to appear.

Fixes:

Inspect the Water Temperature Sensor: Check the sensor for any visible signs of damage or wear. If accessible, test the sensor with a multimeter to ensure it’s functioning correctly.
Check Wiring and Connections: Examine the wiring and connectors leading to the temperature sensor. Look for loose connections, damaged wires, or signs of corrosion, and make any necessary repairs.
Reset the Washer: Disconnecting the washer from its power source for a few minutes can reset the system, potentially clearing any electronic glitches causing the error.
Professional Diagnosis and Repair: If the error persists, it’s advisable to seek professional assistance. A qualified technician can conduct a thorough examination of the temperature sensor circuit, the sensor itself, and the control board to identify and fix the issue.
Replace Faulty Components: Based on the diagnosis, replace any faulty components, whether it’s the water temperature sensor, specific wiring, or the main control board.

Error Code E95

The Frigidaire Washer error code “E95” indicates a communication error between the control boards within the appliance. This error is critical as it points to a failure in the exchange of information between the main control board and other electronic components or boards, such as the interface or power board, which are crucial for the washer’s operation.

Possible Causes:

Faulty Main Control Board: The main control board may have developed a fault, preventing it from communicating effectively with other boards.
Issues with the Interface or Power Board: Similar to the main control board, these boards could be malfunctioning, hindering proper communication.
Wiring and Connection Problems: Damaged or loose wiring between the control boards can disrupt the flow of information.
Electrical Interference: External or internal electrical interference could be affecting the boards’ ability to communicate.

Fixes:

Check and Secure Connections: Inspect all connections between the main control board, interface board, and power board. Ensure that all connections are secure and free of corrosion.
Inspect Wiring: Look for any signs of damage, wear, or loose connections in the wiring between the boards. Repair or replace wiring as necessary.
Reset the Washer: Sometimes, a simple power reset can clear communication errors. Disconnect the washer for a few minutes, then reconnect it to reset the system.
Replace Faulty Boards: If a specific board is identified as faulty, replacing it might be necessary. This task typically requires professional assessment and installation to ensure compatibility and correct functioning.
Seek Professional Help: Due to the complexity of diagnosing and fixing communication errors between electronic boards, professional service is highly recommended. A technician with experience in Frigidaire washers can accurately diagnose the issue and perform the necessary repairs.

Error Code EB1

The Frigidaire Washer error code “EB1” indicates an incoming power frequency out of limits. This error suggests that the electrical power supply to the washer does not match the appliance’s requirements, either because the frequency is too high or too low for the washer’s designed operation.

Possible Causes:

Incorrect Power Supply: The power source may not be supplying the correct frequency required by the washer, which is typically 60 Hz in North America.
Electrical Supply Issues: Problems with the home’s electrical system or local utility service can cause fluctuations in power frequency.
Control Board Sensitivity: The washer’s main control board may be overly sensitive to normal fluctuations in power frequency, triggering the error.

Fixes:

Verify Power Supply Specifications: Check the washer’s manual for the required power supply specifications and compare them with your home’s electrical service to ensure compatibility.
Reset the Washer: Disconnect the washer from the power source for a few minutes to reset the control board. This can sometimes clear transient errors.
Professional Diagnosis: If the problem persists, the issue may lie with the washer’s control board or its ability to tolerate normal power fluctuations. In such cases, a professional appliance repair service is recommended to diagnose and correct the problem accurately.

Error Code EB2

The Frigidaire Washer error code “EB2” signifies that the incoming power voltage is above the limit specified for the appliance. This error indicates that the voltage supplied to the washer from the home’s electrical system exceeds the maximum threshold recommended by the manufacturer, potentially posing a risk to the appliance’s functionality and safety.

Possible Causes:

High Home Voltage Supply: The voltage in your home may be higher than what the washer is designed to handle, often due to fluctuations in the home’s electrical system or local utility supply.
Electrical Surges: Temporary surges in the electrical supply can cause momentary increases in voltage.
Incorrect Electrical Setup: The electrical circuit providing power to the washer might not be correctly configured, leading to higher voltage supply.

Fixes:

Measure Voltage Supply: Use a multimeter to check the voltage at the outlet where the washer is connected. Compare this with the voltage specifications outlined in the washer’s user manual.
Reset the Washer: Disconnecting the washer for a few minutes and then reconnecting it can sometimes reset the system and clear electronic glitches.
Professional Assistance: Persistent over-voltage conditions should be addressed by professional appliance repair technicians or electricians. They can determine if the issue is with the home’s electrical setup or if the washer’s internal components need adjustment or replacement to handle the voltage supply correctly.

Error Code EB3

The Frigidaire Washer error code “EB3” indicates that the incoming power voltage is below the limit specified for the appliance. This error suggests that the voltage supplied to the washer from the home’s electrical system is below the minimum threshold needed for the washer to operate effectively, potentially preventing the washer from performing its functions correctly.

Possible Causes:

Low Home Voltage Supply: The electrical supply to your home, or specifically to the outlet used by the washer, might be lower than what the appliance requires for optimal operation.
Electrical Supply Issues: Problems with the home’s electrical circuit, such as wiring issues or a faulty electrical panel, can result in reduced voltage supply.
Heavy Electrical Load: Other appliances drawing power from the same circuit can reduce the available voltage for the washer, especially if they are high-power devices.

Fixes:

Check Voltage Supply: Use a multimeter to verify the voltage at the washer’s electrical outlet. The reading should match the specifications provided in the washer’s user manual.
Reduce Load on Circuit: If possible, unplug other appliances sharing the same circuit with the washer or redistribute them to different circuits to minimize competition for power.
Reset the Washer: Sometimes, disconnecting the washer for a few minutes and reconnecting it can help reset the system and clear temporary glitches.
Professional Repair: If the issue persists, it may be necessary to contact a professional appliance repair service. They can assess whether the problem lies with the home’s electrical supply or the washer itself and make necessary repairs or adjustments.

Error Display EF1

The Frigidaire Washer error code “EF1” is commonly associated with a clog or blockage in the drain system. This error indicates that the washer is having difficulty draining water, which can be due to various reasons related to the drainage path from the washer.

Possible Causes:

Clogged Drain Filter: The washer’s drain filter or coin trap may be clogged with debris, lint, or small objects, restricting water flow.
Blocked Drain Hose: The hose that carries water away from the washer could be kinked or clogged, preventing efficient drainage.
Drain Pump Issue: The drain pump itself may be malfunctioning or obstructed, leading to inadequate water removal.
Excessive Suds: Using too much detergent or the wrong type can produce excessive suds, which can hinder proper drainage and trigger the EF1 error.

Fixes:

Clean the Drain Filter/Coin Trap: Locate and clean the washer’s drain filter or coin trap according to the manufacturer’s instructions, removing any accumulated debris.
Inspect and Clear the Drain Hose: Check the drain hose for kinks, bends, or clogs. Straighten any kinks and remove blockages if found. Ensure the hose is properly installed and has no upward loops that could trap water.
Check the Drain Pump: Access the drain pump and check for any obstructions that could prevent it from operating correctly. If the pump is faulty or heavily clogged, it may need cleaning or replacement.
Reduce Detergent Use: If excessive suds are the issue, reduce the amount of detergent used in future wash cycles. Consider using a high-efficiency detergent if your washer is an HE model.
Reset the Washer: Try resetting the washer by unplugging it for a few minutes, then plugging it back in. This can sometimes clear minor errors and restore normal function.
Professional Service: If the above steps do not resolve the EF1 error, the issue may require professional diagnosis and repair, especially if it involves complex components like the drain pump.

Error Code EF2

The Frigidaire Washer error code “EF2” signifies “Too Much Soap,” indicating that the machine has detected excessive suds during the wash cycle. This situation typically arises from using too much laundry detergent or using a type of detergent that is not compatible with the washer, especially if it’s a high-efficiency model requiring low-sudsing detergent.

Possible Causes:

Overuse of Detergent: Using more detergent than the manufacturer’s recommendation can lead to excessive suds.
Non-HE Detergent in HE Washer: High-efficiency (HE) washers require low-sudsing HE detergent. Using regular detergent in these machines can create too many suds.
Soft Water Conditions: Homes with soft water may need to use less detergent, as soft water increases sudsing compared to hard water.

Fixes:

Reduce Detergent Amount: Ensure you’re using the correct amount of detergent for your load size and water conditions. Refer to the detergent’s packaging and your washer’s manual for guidance.
Use HE Detergent: If your washer is a high-efficiency model, make sure to use HE detergent, which is designed to produce fewer suds and is more suitable for these types of washers.
Adjust for Water Softness: If you have soft water, you may need to reduce the amount of detergent used even further. Experiment with gradually decreasing the amount until you find the right balance that cleans effectively without creating too many suds.
Run a Rinse Cycle: If the EF2 error occurs, run an additional rinse cycle without adding more detergent to help remove the excess suds from the drum and laundry.
Clean Washer Drum: Regularly clean your washer drum according to the manufacturer’s instructions to remove any residue from detergent or fabric softener that can contribute to suds buildup.
Reset the Washer: Unplugging the washer for a few minutes and then plugging it back in can reset the system and clear the error message.

Safety Reminder

Taking clothes out and restarting your washer is easy. But, fixing sensor problems or control board issues needs special skills and safety steps. If you’re not sure how to fix your washer, it’s best to get help from professionals. This makes sure the checks are right and the repairs are safe. Regular upkeep and following the usage tips can stop mistakes. Call ARNI Services for reliable Frigidaire washer repair.

Get Your Frigidaire Washer Fixed Right

If you managed to troubleshoot and fix your washer, that's great! But if you're not a technical person or couldn't solve the problem, that's why our technicians are here. We can help figure out what's really going on. Sometimes, even though the error seems like one thing, the real issue might be something else. That's why it's important to have a professional do a proper diagnostic to find the problem and fix it the right way. Contact us today, and we'll schedule a technician to come and check your Frigidaire washer so you can have dry clothes again.

Schedule Service